eBook - ePub
Nonionic Surfactants
Polyoxyalkylene Block Copolymers
Vaughn Nace
This is a test
Share book
- 284 pages
- English
- ePUB (mobile friendly)
- Available on iOS & Android
eBook - ePub
Nonionic Surfactants
Polyoxyalkylene Block Copolymers
Vaughn Nace
Book details
Book preview
Table of contents
Citations
About This Book
Focuses on copolymers made from sequential block polymerizations of ethylene oxide, propylene oxide and 1, 2-butylene oxide. This text presents the latest applications of polyoxyalkylene block copolymers in areas such as medicine, coal and petroleum, plastics, emulsion polymerization, paper, photography, personal care and cleaner systems. It offers in-depth coverage of the subject from synthesis and analysis to toxicology and environmental impact.
Frequently asked questions
How do I cancel my subscription?
Can/how do I download books?
At the moment all of our mobile-responsive ePub books are available to download via the app. Most of our PDFs are also available to download and we're working on making the final remaining ones downloadable now. Learn more here.
What is the difference between the pricing plans?
Both plans give you full access to the library and all of Perlegoâs features. The only differences are the price and subscription period: With the annual plan youâll save around 30% compared to 12 months on the monthly plan.
What is Perlego?
We are an online textbook subscription service, where you can get access to an entire online library for less than the price of a single book per month. With over 1 million books across 1000+ topics, weâve got you covered! Learn more here.
Do you support text-to-speech?
Look out for the read-aloud symbol on your next book to see if you can listen to it. The read-aloud tool reads text aloud for you, highlighting the text as it is being read. You can pause it, speed it up and slow it down. Learn more here.
Is Nonionic Surfactants an online PDF/ePUB?
Yes, you can access Nonionic Surfactants by Vaughn Nace in PDF and/or ePUB format, as well as other popular books in Scienze fisiche & Chimica. We have over one million books available in our catalogue for you to explore.
Information
1
Synthesis and Chemical Modification of Polyoxyalkylene Block Copolymers
I. | Polyether Overview |
A. General chemistry | |
B. Molecular weight (block size) considerations | |
C. Safety considerations | |
II. | Preparation and Characterization of Block Copolymers |
A. Polymer initiators | |
B. Base catalyst | |
C. Base neutralization | |
D. Polyether structural considerations | |
E. Planning the synthesis | |
F. Polymer characterization | |
III. | Synthetic Challenges |
A. Deviations from Floryâs first and second assumptions | |
B. Deviations from Floryâs third assumption | |
C. Other common synthetic problems | |
IV. | Modification of Polyoxyalkylene Block Copolymers |
A. Modification of the hydroxyl group | |
B. Modification of the polyether backbone | |
References |
I. POLYETHER OVERVIEW
A. General Chemistry
Polyethers are those polymers containing ether (C-O-C) linkages in the chain backbone. Such polymers are quite numerous. They are derived from a wide variety of monomers, by many different synthetic routes. Polyethers find utility in diverse applications either directly or as chemical intermediates [1]. of necessity this chapter deals with a limited subset of the total polyether realm. Only those polyethers derived from oxirane (also referred to as ethylene oxide and EO), methyloxirane (propylene oxide and PO), and ethyloxirane (1,2âbutylene oxide and BO) will be discussed. Structures of these monomers are shown in Fig. 1. As a class these monomers are called oxiranes, alkylene oxides, AOs, or simply oxides.
While much of what will be said applies to all polyethers, the emphasis of this chapter follows the surfactant theme of the book and deals mainly with the synthesis and, to a lesser degree, the modification of block copolymers. Although many different catalyst systems are used for oxide polymerization [2], only the base-catalyzed mechanism is discussed here. The decision to focus only on preparations using base catalysis is appropriate, as strong base is the catalyst system used for most polyoxyalkylene block copolymers offered as surfactants by industry today [3,4]. Other catalysts used today cover a range of compositions including Lewis acids [5, 6, 7], metal coordination catalysts [8, 9, 10], and metal porphyrin [11, 12, 13]. Some of these catalyst systems readily provide stereoregular polyalkylene glycols of PO and BO [14,15]. Base catalyst is able to do so only when pure l or d oxide isomers are used [16]. While this is an interesting area, no more will be said about stereoregular polyalkylene glycols in this chapter.
Various drawbacks are found in every catalyst system used to date. The reader is encouraged to consider alternate synthetic methods which overcome the problems associated not only with base catalyst discussed below but also to become familiar with the other systems and the problems associated with each of them.
The base-catalyzed polymerization of alkylene oxides has been known for over a century [17,18]. Industrial applications emerged in the late 1940s [19,20]. Although this chapter is not intended to be all inclusive, it is the authorâs wish that it be of benefit to surfactant scientists. For those workers who are now discovering the many uses of block copolymers as surfactants the chapter will serve as an introduction to the fundamental chemistry of alkylene oxide polymers. Appreciation of the many examples of how synthesis can go awry will help all workers. Remembering these anomalies will help to explain erratic results from the measurement of surfactant behavior.
Oxiranes are heterocyclic compounds consisting of two carbon and one oxygen atoms in the ring. All such rings are readily opened by a number of reagents. However, many highly substituted oxiranes do not undergo polymerization or do so only with difficulty. At the other extreme EO, PO, and BO polymerize readily with either acid or base catalysis. Commercial polyethers of low molecular weight (less than 20,000 daltons), narrow molecular weight dispersity, and based on these three oxides are prepared using strong base to facilitate the reaction. Base-catalyzed polymerization of alkylene oxides involves nucleophilic attack of an initiator molecule on one carbon of the ring resulting in hetero-bond cleavage. This bond cleavage generates an alkoxide anion. Itself an excellent nucleophile, the alkoxide anion reacts with another oxide molecule, thus propagating polyether chain growth. This is a second-order nucleophilic replacement (SN2) reaction [21]. The substitution reaction is useful for polymerization as the leaving group is not completely released from the molecule. In this way the oxiranes are bifunctional. Figure 2 depicts this propagation reaction; the formation of secondary hydroxyl groups (Reaction A) is greatly favored over primary hydroxyl groups (Reaction B) when propylene oxide and butylene oxide are polymerized under basic conditions [22]. This has been well known for many years. The implications of this selectivity will be discussed further below.
When low molecular weights are involved, this system appears to be a living polymerization [23]. This pseudoliving process allows ready preparation of block copolymers. This is accomplished by reacting different monomers sequentially. Discrete blocks are formed when the concentration of the first oxide is reduced to essentially zero before the introduction of the second oxide. A transition zone containing both monomer units results when the second oxide is introduced before the first has completely reacted. Polyethers with random distributions of monomer units are made by adding different oxides together [24]. Deviation from a true living polymerization is discussed later in the chapter.
Polyoxyalkylene block copolymers are efficient surfactants. In these materials EO block(s) provide hydrophilicity and PO (or BO) block(s) the hydrophobicity necessary for surfactancy [25,26].
B. Molecular Weight (Block Size) Considerations
Polymerization of oxiranes under basic conditions does not proceed indefinitely. Molecular weights of polyethers prepared with a strong base catalyst might approach 20,000 daltons if a molecule with multiple nucleophilic sites is used as the initiating species. With a single site, however, the molecular weight will seldom exceed 5,000 daltons [27,28]. This molecular weight limit is imposed chemically by extraneous introduction of molecules which initiate growth of new polymer chains [29]. From a practical standpoint, molecular weights for industrial processes are limited by increasingly smaller polymerization rates due to a decrease in catalyst concentration as the polymerization proceeds.
Molecular weight distributions in polyethers are generally very narrow. Polydispersities of 1.05 to 1.15 are typical for polyethylene oxides [21] and slightly wider for polypropylene and polybutylene oxides ...