Global Diagnosis

A New Vision of Dental Diagnosis and Treatment Planning

J. William Robbins, Jeffrey S. Rouse

• Editorial: Quintessence Publishing Co, Inc
• Año: 2019
• ISBN:
  9780867158595
• Categoría: Medicina
• Categoría: Odontología

Incisal edge position is often considered the most important factor when treating complex restorative patients, yet the incisal edges can be in a perfect position and the final result can still fail due to unacceptable gingival levels. The emphasis in the Global Diagnosis system is to determine the etiology of the aberrant gingival positions prior to treatment. The power of the system is that the diagnosis leads to the treatment plan. This book explains the Global Diagnosis system and shows how to diagnose and treat patients based on five CORE questions. Subsequent chapters outline treatment options. The final chapter challenges the reader to treatment plan cases based on the five questions and other diagnostic information. Included is a CD with the CORE template, which allows readers to input diagnostic photographs and information to facilitate record keeping.

1

Global Diagnosis: The Art and Science of Interdisciplinary Treatment Planning

This chapter compares the traditional and contemporary approaches to diagnosis and treatment planning and offers an alternative, global approach.

Traditional Approach to Diagnosis and Treatment Planning: Occlusal Relationships

With an increased emphasis on interdisciplinary treatment planning in recent years, the deficiencies associated with traditional methods of diagnosis and treatment planning have become more evident and problematic. Historically, sophisticated, comprehensive diagnosis and treatment planning was based on an occlusally driven philosophy. The traditional data-collection process included, but was not limited to, a social history, a medical history, a determination of the patient’s chief complaint, a past dental history, charting of missing teeth, charting of existing restorations, charting of defective restorations and caries, periodontal charting, vitality testing, cancer screening examination, occlusal examination, temporomandibular joint and muscle examination, a complete series of radiographs, diagnostic photographs, and study casts mounted on an articulator in a predetermined position.

Once this enormous amount of data was gathered, the dentist would then complete a risk assessment associated with each of the areas of collected data. The dentist then made a diagnosis of each tooth based on the data. This diagnosis may have been related to the pulpal health, the periodontal health, and/or the restorability of the tooth. Additionally, the mounted casts were used to evaluate tooth-to-tooth and arch-to-arch relationships. If required, a diagnostic wax-up was accomplished, based on the occlusal evaluation. The treatment plan was simply based on restorative space, anterior guidance, and resistance and retention form of the final preparations, with no focus on placing the teeth in the correct position in the face.

Once this process was completed, the next step was to create a sequenced treatment plan. However, because of the sheer amount of data, the dentist was often overwhelmed and therefore unable to develop a sequenced treatment plan. The dentist literally did not know where to start. The problem with this traditional approach is that there are many “regional” diagnoses made (ie, pulpal status of the maxillary first premolar) but no “global” diagnosis (ie, where the teeth fit into the patient’s mouth and face). The dentist gets lost in all of the details.

In medicine, the approach is different. When a patient presents with a chief complaint, a history is taken to determine the nature and duration of the complaint. Any systemic conditions such as hypertension are also noted in the history. Specific diagnostic tests are ordered and evaluated based on the chief complaint. Based on the collected data, the next step is to make a diagnosis. If the diagnosis is cancer, for example, then the treatment plan is based on the type and stage of the malignancy. The patient will receive either chemotherapy, radiation therapy, surgery, or a combination approach. However, if the diagnosis is a localized condition, the treatment plan will be completely different. The treatment plan is based on the global diagnosis, not the initial symptoms. If the patient has any systemic conditions such as hypertension, they are considered regional diagnoses. They may be important and may impact the final treatment plan, but they do not dictate the plan.

In medicine, therefore, the sequence is (1) data collection, (2) global diagnosis (perhaps modified by regional diagnoses), (3) treatment plan, whereas in dentistry the sequence is (1) data collection, (2) regional diagnoses, (3) treatment plan. In dentistry, a global diagnosis would determine where the teeth and gingiva should be placed in the patient’s mouth and face, but it is impossible to make this determination using regional diagnoses alone. The dentist is expected to make a global treatment plan based on a lot of regional diagnoses.

Decades ago, the traditional style of regional treatment planning was effective because treatment options were very limited; the restorative dentist had few treatment modalities in addition to tooth preparation. At that time in history, the primary tools available for treating the complex restorative patient were functional crown lengthening surgery and increasing the vertical dimension of occlusion. Practitioners did not have access to advanced periodontal therapies. Predictable root coverage with grafting procedures had not been discovered. Additionally, esthetic crown lengthening surgery had not been described and was not used routinely to treat altered passive eruption.

Orthodontic treatment was primarily for the adolescent patient and was used infrequently with the adult patient. It was seldom a part of a comprehensive treatment plan in an adult patient because there was no emphasis on orthodontic intrusion and extrusion of teeth to enhance the restorative treatment plan. Oral surgery had nothing to offer the restorative dentist other than tooth extraction. More sophisticated maxillofacial surgical procedures were used primarily to treat the trauma patient. Finally, the use of plastic surgery procedures to enhance a comprehensive dental treatment plan had not even been conceived.

Contemporary Approach to Diagnosis and Treatment Planning: Tooth Position

This all changed in the early 1980s. Two young prosthodontists, John Kois and Frank Spear, challenged the traditional approach to prosthodontic treatment planning. With the advanced treatment modalities offered by orthodontics, periodontics, and oral and maxillofacial surgery, along with an increased emphasis on esthetics, they offered a new treatment-planning paradigm based on the belief that if the teeth were placed in the correct position in the patient’s face, effective function would follow. In other words, they began their treatment planning with tooth position rather than condylar position, hence their term facially generated diagnosis.

Along with many others in our profession, the authors embraced this new logical vision of treatment planning. Over the years, we developed a set of guidelines to help us determine the new incisal edge position of the maxillary anterior teeth as the starting point in treatment planning the interdisciplinary patient.

Establishing incisal edge position

Descriptive guidelines

• The incisal edges of the maxillary anterior teeth should be cradled by the lower lip in full smile.

• There should be a smooth continuation between the incisal edges of the maxillary anterior teeth and the buccal cusp tips of the maxillary posterior teeth with no step-up or step-down from front teeth to back teeth.

Confirmation guidelines

• The average incisal display of the maxillary central incisors in repose is 3 to 4 mm in the young female and 1 to 2 mm in the young male.¹

• The average length of the maxillary central incisor is 10 to 11 mm.²

Using these guidelines, a new incisal edge position can be established by the dentist, although this is just a “best guess” based on the four guidelines. A diagnostic wax-up is then completed on the mounted study casts, and stents are fabricated for provisional restorations. After the teeth are prepared, the provisional restorations are placed according to the new proposed incisal edge position. Over the next several days, the patient can dynamically determine if the new position is acceptable in terms of function, phonetics, and esthetics. The provisional restorations can be adjusted until both the patient and the dentist are satisfied. This information is then transferred to the laboratory, and the definitive restorations are fabricated.

The authors utilized this approach to treatment plan complex patients and continue to use it today. However, with time, we realized that this approach also had shortcomings. The incisal edges of the maxillary anterior teeth could be in a perfect position, and yet the definitive restorative result could be a failure because the gingival tissues and/or smile frame were unesthetic (Fig 1-1).

Fig 1-1 Incisal edges in the correct positions but with unesthetic gingival levels. (a) Uneven gingival levels (note the right lateral incisor and canine). (b) Excessive gingival display. (c) Uneven gingival levels (note the central incisors) and excessive gingival display. (d) Uneven gingival levels (note the right lateral incisor and left canine).

Global Approach to Diagnosis and Treatment Planning

This was the genesis of the “global diagnosis” concept, a systematic approach to evaluate, diagnose, and treat aberrations in the gingival positions and the smile frame. In dentistry, there are four primary global diagnoses related to (1) the facial and skeletal proportions, (2) the length and mobility of the maxillary lip, (3) the relationship of the gingival line to horizon, and (4) the length of the clinical crowns of the relevant teeth. In order to determine the global diagnosis, the clinician must first collect a set of data that is not commonly gathered in a traditional dental examination. Chapter 2 defines each of the parameters required to make the global diagnosis along with their normative values. In addition, a form is provided to aid in the collection of the relevant data. In chapter 3, a set of five questions will allow the clinician to determine the global diagnosis. In chapters 4 through 9, the six tools available to treat the global diagnosis are discussed in detail. In chapter 10, special emphasis is given to the global diagnosis that most commonly impacts the treatment plan in the interdisciplinary patient: dentoalveolar extrusion. Once the global diagnosis has been established, it is time to sequence the treatment plan, which is the topic of chapter 11. Chapter 12 features a global diagnosis treatment-planning template that is used for organizing a diagnosis and treatment plan presentation for a patient or a study club. Finally, case studies using the global diagnosis system are presented in chapter 13.

References

1. Vig RG, Brundo GC. The kinetics of anterior tooth display. J Prosthet Dent 1978;39:502–504.

2. Gillen RJ, Schwartz, RS, Hilton TJ, Evans DB. An analysis of selected normative tooth proportions. Int J Prosthodont 1994;7:410–417.

2

Global Analysis Diagnosis Form

The Global Analysis Diagnosis form is the vehicle that leads the dentist through the Global Diagnosis system. This chapter provides instructions for completing the form as well as a set of normative numbers to be used in evaluating the interdisciplinary patient.

As with any dental examination, a reliable, expedient process of recording information is key. The “Global” Analysis Diagnosis (GAD) form (Fig 2-1) allows practitioners to record key esthetic and functional information in a small ...