Introduction to Chemicals from Biomass

James H. Clark, Fabien Deswarte, James H. Clark, Fabien Deswarte

• Publisher: Wiley
• Year: 2011
• Print ISBN:
  9780470058053
• eBook ISBN:
  9781119964438
• Edition: 1
• Topic: Sciences physiques
• Subtopic: Chimie industrielle et technique

Nature provides us with an abundance of chemical potential. Presenting an overview of the use of bioresources in the 21st century, Introduction to Chemicals from Biomass covers resources, chemical composition of biomass, key factors affecting composition, utilization of wastes, extraction technologies, controlled pyrolysis, fermentation, platform molecules, and green chemical technologies for their conversion to valuable chemicals. The text shows how smaller volume chemicals could become bulk chemicals as a result of a greater exploitation of biomass products, making it an important resource for academic and industrial scientists and researchers.

1

The Biorefinery Concept–An Integrated Approach

James H. Clark and Fabien E. I. Deswarte

Green Chemistry Centre of Excellence, University of York, UK

1.1 The Challenge of Sustainable Development

Reconciling the needs of a growing world population with the resulting impact on our environment is ultimately the most complex and important challenge for society. Sustainable development requires an assessment of the degree to which the natural resources of the planet are both in sufficient quantity and in an accessible state to meet these needs, and to be able to deal with the wastes that we inevitably produce in manipulating these resources (including process and end-of-life waste). We can express this in the form of an equation based on the Earth’s capacity EC, the total population exploiting it P, the consumptive (essentially equating to economic) activity of the average person C, and an appropriate conversion factor between activity and environmental burden B.

In a period, such as the present time, of growth in P and C, the latter through economic growth in the developing world, notably India and China, (and an assumption that EC is not limitless and that we may not be far short of reaching its limit) we can only move towards sustainability through a reduction in B.

How can we reduce B? There are only two appropriate routes:

• Dematerialisation (use less resource per person)
• Transmaterialisation (replacement of current raw materials including energy)

Dematerialisation has, to some extent, been a natural part of our technological progress, with less and less resources (e.g. measured as amount of carbon) being used to generate a unit of activity (e.g. measured on the basis of gross domestic product). We have been progressively developing more efficient technologies and legislation and other pressures have forced the processing industries to reduce waste and to make use of that waste through recycling and reuse. However, there are conflicting societal trends that reduce these positive effects on B. Our increasing wealth has brought with it an increase in levels of consumption with individuals using their increasing wealth to buy more goods and to buy more often. The average number of cars, area of housing, quantity of clothes, food purchased and consumer goods (e.g. electronics) per person in the wealthier countries inexorably increases, while the lure of advertising encourages people to change their personal possessions at a rate way above that commensurate with the items’ wear and tear.

Transmaterialisation is a more fundamental approach to the problem, which, with the goal of sustainable development, would ultimately switch consumption to only those resources that are renewable on a short timescale. Clearly petroleum, which takes millions of years to form, is not an example of such a sustainable resource. For the method to be truly effective, the wastes associated with the conversion and consumption of such resources must also be environmentally compatible on a short timescale. The use of polyolefin plastic bags for example, which have lifetimes in the environment of hundreds of years, is not consistent with this (no matter how they compare with alternative packaging materials at other stages in their lifecycle), nor is the use of some hazardous process auxiliaries which are likely to cause rapid environmental damage on release into the environment.

While manufacturing processes have largely become more efficient, both in terms of use of resources and in terms of reduced waste, industry needs to regularly and thoroughly monitor its practises through full inventories of all inputs and outputs. Gate-to-gate environmental footprints help to identify hotspots where new technology can make a significant difference, and help to determine the value of any changes made. In chemical processes, green chemistry metrics such as mass intensity and atom efficiency need to be used alongside yield, and companies need to assist their researchers and process chemists by developing in-house guides (e.g. over choice of solvent), assessment methods, and recommended alternative reagents and technologies. In their present form, these mechanisms are, however, largely limited to further steps towards dematerialisation. Progress towards transmaterialisation requires additional features to be taken into consideration and in some cases a very different way of thinking of the problems. We must add the sustainability of all manufacturing components, inputs and outputs. Are the feedstocks for a particular manufacturing process from sustainable sources? Are the process auxiliaries sustainable? Are the process outputs – product(s) and waste – environmentally compatible e.g. through rapid biodegradation (ideally with the waste having a valuable use, even if it is a completely different application, so that the inevitable release into the environment, as is the fate for all materials, is delayed).

For organic chemicals, transmaterialisation must mean a shift from fossil (mainly petroleum) feedstocks (which have a cycle time of >10⁷ years) to plant-based feedstocks (with cycle times of <10³ years). This immediately raises several fundamentally important questions: Can we produce and use enough plants to satisfy the carbon needs of chemical and related manufacturing, while not compromising other (essentially food and feed) needs? Do we have the technologies necessary to carry out the conversions (biomass to chemicals) and in a way that does not completely compromise the environmental and transmaterialisation characteristics of the new process?

1.2 Renewable Resources — Nature and Availability

We need to find new ways of generating the chemicals, energy and materials, as well as food that a growing world population (increasing ‘P’) and growing individual expectations (increasing ‘C’) needs, doing so while limiting environmental damage. At the beginning of transmaterialisation is the feedstock or primary resource, and this needs to be made renewable (see Table 1.1). An ideal renewable resource is one that can be replenished over a relatively short timescale or is essentially limitless in supply. Resources such as coal, natural gas and crude oil come from carbon dioxide ‘fixed’ by nature through photosynthesis many millions of years ago. They are of limited supply, cannot be replaced and thus are non-renewable. In contrast, resources such as solar radiation, winds, tides and biomass can be considered as renewable resources, which are (if appropriately managed) in no danger of being over-exploited. However, it is important to note that, while the first three resources can be used as a renewable source of energy, biomass can be used to produce not only energy, but also chemicals and materials – the focus of this book.

By definition, biomass corresponds to any organic matter available on a recurring basis (see Figure 1.1). The two most obvious types of biomass are wood and crops (e.g. wheat, maize and rice). Another very important type of biomass we tend to forget is waste (e.g. food waste, manure, etc). These resources are generally considered to be renewable as they can be continually re-grown/regenerated. They take up carbon dioxide from the air while they are growing (through photosynthesis) and then return it to the air at the end of life, thereby creating a ‘closed loop’ (Deswarte, 2008).

Table 1.1 Different types of renewable and non-renewable resources

Non-Renewable Resources	Renewable Resources
Coal	sun
Natyral gas	Tides ad Hydro
Crude oil	Bipmass
	Wind

Figure 1.1 Different types of biomass

Food crops can indeed be used to produce energy (e.g. biodiesel from vegetable oil), materials (e.g. polylactic acid from corn) and chemicals (e.g. polyols from wheat). However, it is now becoming widely recognised by governments and scientists that waste and lignocellulosic materials (e.g. wood, straw, energy crops) offer a much better opportunity, since they avoid competition with the food sector and, often, do not require as much land and fertilisers to grow. In fact, only 3% of the 170 million tonnes of biomass produced yearly by photosynthesis is currently being cultivated, harvested and used (food and non-food applications) (Sanders et al., 2005). Indeed, according to a recent report published by the USDOE and the USDA (2005), the US alone could sustainably supply more than one billion dry tons of biomass annually by 2030. As seen in Table 1.2, the biomass potential in Europe is also enormous.

About 10% of all the oil we extract in the world is used to make organic chemicals and related materials. A remarkable additional 10% is used for energy to drive the chemical reactions. In the EU, this corresponded to 166 million tonnes in 2000. While increases in efficiency of chemical manufacturing in the EU have been considerable, an OECD estimate has shown that the chemical industry worldwide produces about 4% of global carbon dioxide emissions (10¹² tonnes). A shift away from fossil resources should thus benefit both resource depletion, pollution and global warming.

Table 1.2 Biomass potential in the EU (European Commision, 2006)

1.3 Impact on Ecosystem Services

Ecosystem services are the goods and services provided by coupled and ecological social systems. They are at the heart of our quality of life by providing the materials on which we base our lifestyles, and we all inevitably depend on the sustainable use of ecosystem services. The millennium ecosystems assessment brought this to our attention (Ecosystems and Human Well-Being, 2007) by stating that the ability of many ecosystems to deliver valuable services has been compromised by resource over-exploitation and by environmental degradation.

The figures provided by the European Biofuels Research Advisory Council (see Table 1.2) suggest an increasing potential for the conversion of biomass to biofuels in Europe over the next 20+ years, but can the European environment cope with ever-increasing biomass exploitation? We must give greater consideration to the associated stresses on large areas of land and associated systems, including water, food production and recreation (even the use of low value/waste materials such as straw and grasses will have effects). In general, when considering such enormous changes in ecosystem services exploitation we need to:

• Study the associated changes in the quality and availability of local ecosystem services
• Consider how activities in one region can affect ecosystem services elsewhere
• Study the linkage between livelihoods, human well-being and ecosystem services
• Consider how to manage the ecosystem services under pressure.

1.4 The Biorefinery Concept

1.4.1 Definition

One way to mitigate the negative effects of local ecosystem services is to convert biomass into a variety of chemicals (Chapters 2 and 4), biomaterials (Chapter 5) and energy (Chapter 6), maximising the value of the biomass and minimising waste. This integrated approach corresponds to the biorefinery concept and is gaining increased attention in many parts of the world (Kamm and Kamm, 2004; Halasz et al, 2005) As illustrated in Figure 1.2, the biorefinery of the future will be analogous to today’s petrorefineries (Realff and Abbas, 2004; National Renewable Energy Laboratory, www.nrel.gov/biomass/biorefinery.xhtml).

Similarly to oil-based refineries, where many energy and chemical products are produced from crude oil, biorefineries will produce many different industrial products from biomass. These will include low-value, high-volume products, such as transportation fuels (e.g. biodiesel, bioethanol), commodity chemicals, as well as materials, and high-value, low-volume products or speciality chemicals, such as cosmetics or nutraceuticals. Energy is the driver for developments in this area, but as biorefineries become more and more sophisticated with time, other products will be developed. In some types of biorefinery, food and feed production may well also be incorporated.

1.4.2 Different Types of Biorefinery

Three different types of biorefinery have been described in the literature (van Dyne et al, 1999; Kamm & Kamm, 2004; Fernando et al, 2006):

• Phase I biorefinery (single feedstock, single process and single major product)
• Phase II biorefinery (single feedstock, multiple processes and multiple major products)

• Phase III biorefinery (multiple feedstocks, multiple processes and multiple major products).

Figure 1.2 Comparison of petrorefinery vs. biorefinery

Figure 1.3 The biodiesel process – an example of a phase I biorefinery

Phase I Biorefinery

Phase I biorefineries use one only feedstock, have fixed processing capabilities (single process) and have a single major product. They are already in operation and are proven to be economically viable. In Europe, there are now many ‘phase I biorefineries’ producing biodiesel. They use vegetable oil (mainly rapeseed oil in the EU) as a feedstock and produce fixed amounts of biodiesel and glycerine through a single process called transesterification (see Figure 1.3). They thus have almost no flexibility to recover investment and operating costs. Other examples of phase I biorefinery include today’s pulp and paper mills, and corn grain-to-ethanol plants.

Phase II Biorefinery

Similarly to phase I biorefineries, phase II biorefineries can only process one feedstock. However, they are capable of producing various end products (energy, chemicals and materials) and thus respond to market demand, prices, contract obligation and the plant’s operating limits. One example of a phase II biorefinery is the Nova-mont plant in Italy, which uses corn starch to produce a range of chemical products including biodegradable polyesters (Origi-Bi) and starch-derived thermoplastics (Mater-Bi) www.materbi.com). Another example of this type of biorefinery is the Roquette site at Lestrem in France that produces a multitude of carbohydrate derivatives, including native and modified starches, sweeteners, polyol...

Table of contents

• Cover
• Series page
• Title page
• Copyright
• Series Preface
• Preface
• List of Contributors
• 1: The Biorefinery Concept–An Integrated Approach
• 2: The Chemical Value of Biomass
• 3: Green Chemical Technologies
• 4: Production of Chemicals from Biomass
• 5: Biomaterials
• 6: Production of Energy from Biomass
• Index