First U.K. National Conference on Heat Transfer
eBook - PDF

First U.K. National Conference on Heat Transfer

The Institution of Chemical Engineers Symposium Series, Volume 1.86

  1. 637 pages
  2. English
  3. PDF
  4. Available on iOS & Android
eBook - PDF

First U.K. National Conference on Heat Transfer

The Institution of Chemical Engineers Symposium Series, Volume 1.86

About this book

First U.K. National Conference on Heat Transfer, Volume 1, documents the proceedings of the conference organized by the U.K. National Committee for Heat Transfer—a joint committee of the Institutions of Chemical and Mechanical Engineers and includes a member nominated by the Heat Transfer Society—held at the University of Leeds, on 3-5 July 1984. It is intended that the Leeds conference will be the first of a series of UK National Conferences which will be held at four-yearly intervals (1984, 1988, 1992 etc). Thus, for people working in the heat transfer field there will be an opportunity to present and discuss their work at a major conference every two years. This volume contains 55 papers that are presented during Sessions 1-10. The papers in Session 1 deal with post dry-out and drop heat transfer. Session 2 presents studies on the thermal hydraulic aspects of accidents and transients. Session 3 contains papers on the thermal hydraulics of reflood. Session 4 focuses on reactor operational heat transfer while Session 5 deals with AGR and other fuel heat transfer. The presentations in Session 6 cover fouling mechanisms while those in Session 7 focus on fouling detection, inhibition, and control. Session 8 takes up heat transfer in regenerators and fixed beds. Session 9 discusses papers on heat exchange networks. Session 10 contains studies on condensation and condensers.

Frequently asked questions

Yes, you can cancel anytime from the Subscription tab in your account settings on the Perlego website. Your subscription will stay active until the end of your current billing period. Learn how to cancel your subscription.
No, books cannot be downloaded as external files, such as PDFs, for use outside of Perlego. However, you can download books within the Perlego app for offline reading on mobile or tablet. Learn more here.
Perlego offers two plans: Essential and Complete
  • Essential is ideal for learners and professionals who enjoy exploring a wide range of subjects. Access the Essential Library with 800,000+ trusted titles and best-sellers across business, personal growth, and the humanities. Includes unlimited reading time and Standard Read Aloud voice.
  • Complete: Perfect for advanced learners and researchers needing full, unrestricted access. Unlock 1.4M+ books across hundreds of subjects, including academic and specialized titles. The Complete Plan also includes advanced features like Premium Read Aloud and Research Assistant.
Both plans are available with monthly, semester, or annual billing cycles.
We are an online textbook subscription service, where you can get access to an entire online library for less than the price of a single book per month. With over 1 million books across 1000+ topics, we’ve got you covered! Learn more here.
Look out for the read-aloud symbol on your next book to see if you can listen to it. The read-aloud tool reads text aloud for you, highlighting the text as it is being read. You can pause it, speed it up and slow it down. Learn more here.
Yes! You can use the Perlego app on both iOS or Android devices to read anytime, anywhere — even offline. Perfect for commutes or when you’re on the go.
Please note we cannot support devices running on iOS 13 and Android 7 or earlier. Learn more about using the app.
Yes, you can access First U.K. National Conference on Heat Transfer by Sam Stuart in PDF and/or ePUB format, as well as other popular books in Technology & Engineering & Industrial & Technical Chemistry. We have over one million books available in our catalogue for you to explore.

Table of contents

  1. Front Cover
  2. First U.K. National Conference on Heat Transfer
  3. Copyrigh Page
  4. Table of Contents
  5. Preface
  6. CHAPTER 1. STEADY STATE POST-DRYOUT HEAT TRANSFER IN A VERTICAL TUBE WITH LOW INLET QUALITY
  7. CHAPTER 2. INVERTED ANNULAR FILM BOILING AND THE BROMLEY MODEL
  8. CHAPTER 3. CONTROL PROBLEMS IN STEADY STATE TRANSITION BOILING MEASUREMENTS
  9. CHAPTER 4. THE LANGMUIR COEFFICIENT FOR HEAT AND MASS TRANSFER FOR A DROP IN SUPERHEATED VAPOUR WITH INERT GAS AND FOG PRESENT
  10. CHAPTER 5. DROPLET DYNAMICS AND HEAT TRANSFER IN DISPERSED TWO-PHASE FLOW
  11. CHAPTER 6. SURFACE EFFECTS IN QUENCHING OF HOT SOLIDS
  12. CHAPTER 7. DEVELOPMENT OF FLOW BOILING FOLLOWING DEPRESSURISATION
  13. CHAPTER 8. PRELIMINARY MEASUREMENTS OF STEAM EXPLOSION WORK YIELDS IN A CONSTRAINED SYSTEM
  14. CHAPTER 9. MODELING OF CLAD FAILURE BY MELT THROUGH AND APPLICATIONS TO CABRI EXPERIMENTS USING THE PHYSURA CODE
  15. CHAPTER 10. The Thermodynamics of Thermal Explosions
  16. CHAPTER 11. CRITICAL DISCHARGE OF SUB-COOLED WATER AT VERY HIGH PRESSURE
  17. CHAPTER 12. FORCED CONVECTION HEAT TRANSFER TO I-SECTIONS IN CROSS FLOW
  18. CHAPTER 13. A SIMPLE MECHANISTIC MODEL FOR PWR REFLOOD COMPARED WITH FLECHT SEASET DATA
  19. CHAPTER 14. MODELLING REFLOOD HEAT TRANSFER
  20. CHAPTER 15. REVISED USER GUIDELINES FOR HEAT TRANSFER IN RELAP4/MOD6 BASED ON FLECHT-SEASET COMPARISONS
  21. CHAPTER 16. COMPARISON OF CALCULATIONS USING THE BEST ESTIMATE REFLOOD HEAT TRANSFER CODE BART-A1 WITH DATA FROM THE FLECHT-SEASET FACILITY
  22. CHAPTER 17. REPLOOD HEAT TRANSFER IN SEVERELY BLOCKED PWR FUEL ASSEMBLIES
  23. CHAPTER 18. ANNULAR TWO PHASE FLOW IN CONSTRICTED TUBES
  24. CHAPTER 19. HEAT TRANSFER DATA, INCLUDING IMPAIRMENT BY BUOYANCY, FOR A CAGR FUEL CLUSTER IN A REYNOLDS NUMBER RANGE 103 - 106
  25. CHAPTER 20. BUOYANCY EFFECTS AND MIXING IN A SMALL SCALEWATER MODEL OF AN LMFBR ABOVE-CORE PLENUM
  26. CHAPTER 21. A THREE-DIMENSIONAL THERMAL HYDRAULIC ANALYSIS OF THE PFR STEAM GENERATORS
  27. CHAPTER 22. THE THERMAL PERFORMANCE OF SERPENTINE TUBE HEAT EXCHANGERS
  28. CHAPTER 23. THE OPERATIONAL AND MAINTENANCE ASPECTS OF REACTOR PRESSURE VESSEL COOLING
  29. CHAPTER 24. EXPERIMENTAL STUDY OF BUFFER STORE COOLING OF FUEL SUB-ASSEMBLIES
  30. CHAPTER 25. AN ASSESSMENT OF INSTALLATION ERRORS FOR THERMOCOUPLES FITTED TO THICK-WALLED AGR FUEL PINS
  31. CHAPTER 26. THE CALCULATION OF TEMPERATURES IN GAS-COOLED CLUSTERS OF FUEL PINS
  32. CHAPTER 27. HEAT TRANSFER AND FLUID FLOW MEASUREMENTS NEAR THE EXIT OF A 36 PIN SIMULATED CAGR FUEL CLUSTER
  33. CHAPTER 28. A COMPARISON OF MEASURED AND PREDICTED TEMPERATURES IN CAGR ON-LOAD INSTRUMENTED STRINGERS
  34. CHAPTER 29. A NUMERICAI INVESTIGATION OF TURBULENT FLOW AND CONJUGATE HEAT TRANSFER IN A 4-CUSP CHANNEL
  35. CHAPTER 30. THE EFFECT OF BOWING ON LOCAL HEAT TRANSFER RATES FROM RIB-ROUGHENED FUEL ELEMENTS
  36. CHAPTER 31. CORRELATIONS FOR GAS-SIDE FOULING OF FINNED TUBES
  37. CHAPTER 32. HEAT EXCHANGER FOULING: A STUDY OF UNDERLYING MECHANISMS FOR PARTICULATE DEPOSITION
  38. CHAPTER 33. HYDRODYNAMICS EFFECTS ON PARTICULATE FOULING
  39. CHAPTER 34. BIOLOGICAL-PARTICULATE FOULING INTERACTIONS: EFFECTS OF SUSPENDED PARTICLES ON BIOFILM DEVELOPMENT
  40. CHAPTER 35. FOULING IN A HYDROCARBON VAPORISER
  41. CHAPTER 36. THE USE OF A PORTABLE PROBE TO STUDY FOULING IN EXHAUST GAS STREAMS
  42. CHAPTER 37. TECHNIQUES FOR THE EVALUATION OF SCALING INHIBITORS FOR USE IN HEAT TRANSFER EQUIPMENT
  43. CHAPTER 38. REMOVAL OF CRYSTALLINE SCALE: MECHANISMS AND THE ROLE OF THERMALSTRESS
  44. CHAPTER 39. GLEANING CHARACTERISTICS OF A PLATE HEAT EXCHANGER FOULED WITH TOMATO PASTE USING 2% CAUSTIC SODA SOLUTION
  45. CHAPTER 40. A REVIEW OF SOME EXPERIMENTAL INVESTIGATIONS ON REGENERATORS
  46. CHAPTER 41. DEVELOPMENT OF AN APPARATUS TO INVESTIGATE THE THERMAL CHARACTERISTICS OF REGENERATORS
  47. CHAPTER 42. PREDICTION OF HEAT TRANSFER COEFFICIENTS FROM CYCLIC REGENERATOR AND SINGLE SHOT PACKED BED DATA
  48. CHAPTER 43. THE CHARACTERISATION OF RADIAL HEAT TRANSFER IN FIXED BEDS
  49. CHAPTER 44. LAMINAR FILM HEAT TRANSFER FOR COOLING OF PACKED BEDS
  50. CHAPTER 45. PARTICLE-BED HEAT TRANSFER STUDIES AT THE ATOMIC ENERGY ESTABLISHMENT WINFRITH (UKAEA)
  51. CHAPTER 46. THE DESIGN OF FLEXIBLE HEAT EXCHANGER NETWORKS
  52. CHAPTER 47. COMPUTER-AIDED SYNTHESIS OF HEAT EXCHANGER NETWORKS; AN ITERATIVE APPROACH TO GLOBAL OPTIMUM NETWORKS
  53. CHAPTER 48. AN ALGORITHM TO DEVELOP HEAT EXCHANGER NETWORKS WITH THE MINIMUM NUMBER OF STREAM SPLITS AND MAXIMUM ENERGY RECOVERY
  54. CHAPTER 49. DESIGN OF OPERABLE HEAT EXCHANGER NETWORKS
  55. CHAPTER 50. NEW MEASUREMENTS FOR FORCED-CONVECTION FILM CONDENSATION
  56. CHAPTER 51. INVESTIGATION OF INTEGRAL-FIN-TYPE CONDENSER TUBES FOR PROCESS INDUSTRY APPLICATIONS
  57. CHAPTER 52. SIMULATED CONDENSATE FILM THICKNESS AND DRAINAGE STUDIES
  58. CHAPTER 53. THE PERFORMANCE CHARACTERISTICS OF A 500 MW (e) STEAM TURBINE CONDENSER AND ITS INTERACTION WITH THE AIR EXTRACTION PLANT
  59. CHAPTER 54. SUBMERGENCE IN BAFFLED SHELL-AND-TUBE HEAT EXCHANGERS
  60. CHAPTER 55. THE DESIGN AND USE OF PLATE HEAT EXCHANGERS IN BOILING AND CONDENSING APPLICATIONS