Experimental and Applied Mechanics, Volume 6

Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics

Tom Proulx

• Publisher: River Publishers
• Year: 2025
• eBook ISBN:
  9781040603253
• Topic: Technology & Engineering
• Index: Technology & Engineering

This the sixth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 128 chapters on Experimental and Applied Mechanics. It presents early findings from experimental and computational investigations including High Accuracy Optical Measurements of Surface Topography, Elastic Properties of Living Cells, Standards for Validating Stress Analyses by Integrating Simulation and Experimentation, Efficiency Enhancement of Dye-sensitized Solar Cell, and Blast Performance of Sandwich Composites With Functionally Graded Core.

Table of contents

• Cover
• Serious Page
• Title Page
• Copyright Page
• Preface
• Table of Contents
• 1 High Accuracy Optical Measurements of Surface Topography
• 2 Industrial Finishes of Ceramic Surfaces at the Micro-level and its Influence on Strength
• 3 Elastic Properties of Living Cells
• 4 Standards for Validating Stress Analyses by Integrating Simulation and Experimentation
• 5 Avalanche Behavior of Minute Deformation Around Yield Point of Polycrystalline Pure Ti
• 6 The Effect of Noise on Capacitive Measurements of MEMS Geometries
• 7 Effects of Clearance on Thick, Single-Lap Bolted Joints Using Through-the-thickness Measuring Techniques
• 8 Deformation and Performance Measurements of MAV Flapping Wings
• 9 Dynamic Constitutive Behavior of Aluminum Alloys: Experimental & Numerical Studies
• 10 Estimating Surface Coverage of Gold Nanoparticles Deposited on MEMS
• 11 Functionally Graded Metallic Structure for Bone Replacement
• 12 Dissipative Energy as an Indicator of Material Microstructural Evolution
• 13 Temporal Phase Stepping Photoelasticity by Load or Wavelength
• 14 Determination of the Isoclinic Map for Complex Photoelastic Fringe Patterns
• 15 A Study on the Behaviors and Stresses of O-ring Under Uniform Squeeze Rates and Internal Pressure by Transparent Type Photoelastic Experiment
• 16 Strength Physics at Nano-scale and Application of Optical Interferometry
• 17 Light Generation at the Nano Scale, Key to Interferometry at the Nano Scale
• 18 Mechanical Characterization of Nanowires Using a Customized Atomic Force Microscope
• 19 Blast Performance of Sandwich Composites With Functionally Graded Core
• 20 Thermal Softening of an UFG Aluminum Alloy at High Rates
• 21 Blast Loading Response of Glass Panels
• 22 Novel Approach to 3D Imaging Based on Fringe Projection Technique
• 23 Measuring Shear Stress in Microfluidics Using Traction Force Microscopy
• 24 Efficiency Enhancement of Dye-sensitized Solar Cel
• 25 Integration of Solar Cell With TN-LC Cell for Enhancing Power Characteristics
• 26 Full-field Measuring System for the Surface of Solar Cell
• 27 Photographic Diagnosis of Crystalline Silicon Solar Cells by Electroluminescence
• 28 Novel Interfacial Adhesion Experiments With Individual Carbon Nanofibers
• 29 Dynamic Constitutive Behavior of Reinforced Hydrogels Inside Liquid Environment
• 30 Osteon Size Effect on the Dynamic Fracture Toughness of Bone
• 31 Radial Inertia in Non-cylindrical Specimens in a Kolsky Bar
• 32 Core Deformation of Sandwich Composites Under Blast Loading
• 33 Influence of Friction-stir-welding Parameters on Texture and Mechanical Behavior
• 34 Measurement of Stresses in Pipelines Using Hole Drilling Rosettes
• 35 Incremental Computation Technique for Residual Stress Calculations Using the Integral Method
• 36 Experimental Investigation of Residual Stresses in Water and Air Quenched Aluminum Alloy Castings
• 37 Residual Stress on AISI 300 Sintered Materials
• 38 Practical Experiences in Hole Drilling Measurements of Residual Stresses
• 39 Destructive Methods for Measuring Residual Stresses: Techniques and Opportunities
• 40 The Contour Method Cutting Assumption: Error Minimization and Correction
• 41 Measurements of Residual Stress in Fracture Mechanics Coupons
• 42 Analysis of Large Scale Composite Components Using TSA at Low Cyclic Frequencies
• 43 Determining Stresses Thermoelastically Around Neighboring Holes Whose Associated Stresses Interact
• 44 Crack Tip Stress Fields Under Biaxial Loads Using TSA
• 45 Extending TSA With a Polar Stress Function to Non-circular Cutouts
• 46 Novel Synthetic Material Mimicking Mechanisms From Natural Nacre
• 47 Mechanical Characterization of Synthetic Vascular Materials
• 48 MgO Nanoparticles Affect on the Osteoblast Cell Function and Adhesion Strength of Engineered Tissue Constructs
• 49 Mechanical Interactions of Mouse Mammary Gland Cells With a Three-dimensional Matrix Construct
• 50 Tracking Nanoparticles Optically to Study Their Interaction With Cells
• 51 Coherent Gradient Sensing Microscopy: Microinterferometric Technique for Quantitative Cell Detection
• 52 Rate Effects in the Failure Strength of Extraterrestrial Materials
• 53 Determination of Dynamic Tensile Properties for Low Strength Brittle Solids
• 54 The Mechanical Response of Aluminum Nitride at Very High Strain Rates
• 55 Dynamic and Quasi-static Measurements of C-4 and Primasheet P1000 Explosives
• 56 Dynamic Characterization of Mock Explosive Material Using Reverse Taylor Impact Experiments
• 57 Mechanical Behavior of Hierarchically-structured Polymer Composites
• 58 Composite Design Through Biomimetic Inspirations
• 59 Nano-composite Sensors for Wide Range Measurement of Ligament Strain
• 60 Advanced Biologically-inspired Flapping Wing Structure Development
• 61 Characterization of Electrode-electrolyte Interface Strengths in SOFCs
• 62 Die Separation Strength for Deep Reactive Ion Etched Wafers
• 63 Temperature Moisture and Mode Mixity Dependent EMC- Copper (Oxide) Interfacial Toughness
• 64 An Integrated Experimental and Numerical Analysis on Notch and Interface Interaction in Same-materials
• 65 Differentiation of Human Embryonic Stem Cells Encapsulated in Hydrogel Matrix Materials
• 66 Nonlinear Viscoelasticity of Native and Engineered Ligament and Tendon
• 67 Spinal Ligaments: Anisotropic Characterization Using Very Small Samples
• 68 In-Flight Wing-membrane Strain Measurements on Bats
• 69 The Mechanical Properties of Musa Textilis Petiole
• 70 Analysis of Strain Energy Behavior Throughout a Fatigue Process
• 71 Relating Fatigue Strain Accumulation to Microstructure Using Digital Image Correlation
• 72 High Cycle Fatigue of Structural Components Using Critical Distance Methods
• 73 Crack Propagation Analysis of New Galata Bridge
• 74 Stress-dependent Elastic Behaviour of a Titanium Alloy at Elevated Temperatures
• 75 Numerical and Experimental Modal Analysis Applied to the Membrane of Micro Air Vehicles Pliant Wings
• 76 Objective Determination of Acoustic Quality in a Multipurpose Auditorium
• 77 Identification and Enhancement of On-stage Acoustics in a Multipurpose Auditorium
• 78 Fractional Calculus of Hydraulic Drag in the Free Falling Process
• 79 Fatigue Cracks In Fibre Metal Laminates in the Presence of Rivets and Cold Expanded Holes
• 80 Effect of Nonlinear Parametric Model Accuracy in Crack Prediction and Detection
• 81 Optical Based Residual Strain Measurements
• 82 Correlating Fatigue Life With Elastic and Plastic Strain Data
• 83 Monitoring Crack Tip Plastic Zone Size During Fatigue Loading
• 84 Studying Thermomechanical Fatigue of Hastelloy X Using Digital Image Correlation
• 85 Understanding Mechanisms of Cyclic Plastic Strain Accumulation Under High Temperature Loading Conditions
• 86 Simulated Corrosion-fatigue via Ocean Waves on 2024-aluminum
• 87 The Effect of Processing Conditions on the Properties of Thermoplastic Composites
• 88 Calculation of Shells and Plates Constructed From Composite Materials
• 89 Reducing Build Variation in Arched Guitar Plates
• 90 Rotation Angle Measurement Using an Electro-optic Heterodyne Interferometer
• 91 Digital Shadow Moiré Measurement of Out-of-Plane Hygrothermal Displacement of TFT-LCD Backlight Modules
• 92 Theory and Applications of Universal Phase-shifting Algorithm
• 93 Evaluation of Crash Energy Absorption Capacity of a Tearing Tube
• 94 Fracture Studies Combining Photoelasticity and Coherent Gradient Sensing for Stress Determination
• 95 Strength and Fracture Behavior of Diffusion Bonded Joints
• 96 Fabrication and Characterization of Novel Graded Bone Implant Material
• 97 A Dynamic Design Model for Teaching
• 98 Video Demonstrations to Enhance Learning of Mechanics of Materials Inside and Outside the Classroom
• 99 Experimentation and Product-making Workshop Simplified for Easy Execution in Classroom
• 100 Illustrating Essentials of Experimental Stress Analysis Using a U-Shaped Beam
• 101 Demonstration of Rod-wave Velocity in a Lecture Class
• 102 Influence of Friction-stir-welding Parameters on Texture and Tensile Behavior
• 103 Comparing Two Different Approaches to the Identification of the Plastic Parameters of Metals in Post-necking Regime
• 104 Determination of Hardening Behaviour and Contact Friction of Sheet Metal in a Multi-layered Upsetting Test
• 105 Measuring the Elastic Modulus of Soft Thin Films on Substrates
• 106 Characterization in Birefringence/Diattenuation of an Optical Fiber in a Fiber-type Polarimetry
• 107 Predictive Fault Detection for Missile Defense Mission Equipment and Structures
• 108 Portable Maintenance Support Tool Enhancing Battle Readiness of MDA Structures and Vehicles
• 109 A Compact System for Measurement of Absorbance of Light
• 110 Fracture Mechanics Analysis in Frost Breakage of Reservoir Revetment on Cold Regions
• 111 Combined Experimental/Numerical Assessment of Compression After Impact of Sandwich Composite Structures
• 112 Mechanical Behavior of Co-continuous Polymer Composites
• 113 Laboratory Evaluation of a Silicone Foam Sealant for Field Application on Bridge Expansion Joints
• 114 Effect of Prior Cold Work on the Mechanical Properties of Weldments
• 115 Use of Viscoplastic Models for Prediction of Deformation of Polymer Parts
• 116 Mechanical Characterization of SLM Specimens With Speckle Interferometry and Numerical Optimization
• 117 Torsion/compression Testing of Grey Cast Iron for a Plasticity Model
• 118 Nucleation and Propagation of Portevin-Le Châtelier Bands in Austenitic Steel With Twinning Induced Plasticity
• 119 Identification and Enhancement of On-stage Acoustics in a Multipurpose Auditorium
• 120 Determination of Objective Architectural Acoustic Quality of a Multi-purpose Auditorium
• 121 Notch-interface Experiments to Determine the Crack Initiation Loads
• 122 Mechanical Characterization of Alternating Magnetic Field Responsive Hydrogels at Micro-scale
• 123 Investigation of a Force Hardening Spring System
• 124 Resonance Behavior of Magnetostrictive Sensor in Biological Agent Detection
• 125 Detection of Damage Initiation and Growth of Carbon Nanotube Reinforced Epoxy Composites
• 126 Nano-mechanical Characterization of Polypropylene Fibers Exposed to Ultraviolet and Thermal Degradation
• 127 Detachment Dynamics of Cancer Cells
• 128 Compression Testing of Biomimetic Bones With 3D Deformation Measurements