Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9

Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics

Sven Bossuyt, Gary Schajer, Alberto Carpinteri

• Publisher: River Publishers
• Year: 2025
• eBook ISBN:
  9781040603192
• Topic: Technology & Engineering
• Index: Technology & Engineering

Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9 of the Proceedings of the 2015SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:
Inverse Methods
Inverse Methods in Plasticity
Varying Length Scales
Harsh Environments
Opto-Acoustical Methods
Hybrid Experimental
Residual Stress Modelling and Advances in Measurements
Thermomechanics
General Material Response
Infrared Imaging.

Table of contents

• Cover
• Series Page
• Title Page
• Copyright Page
• Preface
• Table of Contents
• 1 Reconstruction of Spatially Varying Random Material Properties by Self-Optimizing Inverse Method
• 2 Performance Assessment of Integrated Digital Image Correlation Versus FEM Updating
• 3 IGMU: A Geometrically Consistent Framework for Identification from Full Field Measurement
• 4 Characterization of the Dynamic Strain Hardening Behavior from Full-field Measurements
• 5 Bridging Kinematic Measurements and Crystal Plasticity Models in Austenitic Stainless Steels
• 6 Inverse Identification of Plastic Material Behavior Using Multi-Scale Virtual Experiments
• 7 An Effective Experimental-Numerical Procedure for Damage Assessment of Ti6Al4V
• 8 Identification of the YLD2000-2D Model with the Virtual Fields Method
• 9 Identification of Post-necking Strain Hardening Behavior of Pure Titanium Sheet
• 10 Challenges for High-Pressure High-Temperature Applications of Rubber Materials in the Oil and Gas Industry
• 11 Full-Field Strain Imaging of Ultrasonic Waves in Solids
• 12 Acoustic Emission Analysis in Titanium Grade 5 Samples During Fatigue Test
• 13 Analysis of High-Frequency Vibrational Modes Through Laser Pulses
• 14 Acquisition of Audio Information from Silent High Speed Video
• 15 Overview of the Effects of Process Parameters on the Accuracy in Residual Stress Measurements by Using HD and ESPI
• 16 Near Weld Stress Analysis with Optical and Acoustic Methods
• 17 Nondestructive Characterization of Thin Film System with Dual-Beam Interferometer
• 18 Effect of Horn Tip Geometry on Ultrasonic Cavitation Peening
• 19 Fatigue Damage Analysis of Aluminum Alloy by ESPI
• 20 Dynamic Failure Mechanisms in Woven Ceramic Fabric Reinforced Metal Matrix Composites During Ballistic Impact
• 21 Digital Image Correlation Analysis and Numerical Simulation of the Aluminum Alloys under Quasi-static Tension after Necking Using the Bridgman’s Method
• 22 Robust Intermediate Strain Rate Experimentation Using the Serpentine Transmitted Bar
• 23 Testing Program for Crashworthiness Assessment of Cutaway Buses
• 24 In-Situ DIC and Strain Gauges to Isolate the Deficiencies in a Model for Indentation Including Anisotropic Plasticity
• 25 Analysis of Laser Weld Induced Stress in a Hermetic Seal
• 26 A Summary of Failures Caused by Residual Stresses
• 27 Comparative Analysis of Shot-Peened Residual Stresses Using Micro-Hole Drilling, Micro-Slot Cutting, X-ray Diffraction Methods and Finite-Element Modelling
• 28 Thermal Deformation Analysis of an Aluminum Alloy Utilizing 3D DIC
• 29 Hybrid Full-Field Stress Analysis of Loaded Perforated Asymmetrical Plate
• 30 Automated Detection of CFRP Defects by Infrared Thermography and Image Analysis
• 31 Modelling the Residual Stress Field Ahead of the Notch Root in Shot Peened V-Notched Samples
• 32 Numerical Prediction of Temperature and Residual Stress Fields in LFSW
• 33 Residual Stress Measurement on Shot Peened Samples Using FIB-DIC
• 34 Residual Stress in Injection Stretch Blow Molded PET Bottles
• 35 Applying Infrared Thermography and Heat Source Reconstruction for the Analysis of the Portevin-Le Chatelier Effect in an Aluminum Alloy
• 36 Applying a Gad Filter to Calculate Heat Sources from Noisy Temperature Fields
• 37 Contour Method Residual Stress Measurement Uncertainty in a Quenched Aluminum Bar and a Stainless Steel Welded Plate
• 38 On the Separation of Complete Triaxial Strain/Stress Profiles from Diffraction Experiments
• 39 Residual Stress Mapping with Multiple Slitting Measurements
• 40 A Novel Approach for Biaxial Residual Stress Mapping Using the Contour and Slitting Methods
• 41 Measurement of Residual Stresses in B4C-SiC-Si Ceramics Using Raman Spectroscopy
• 42 Hole Drilling Determination of Residual Stresses Varying Along a Surface
• 43 Sensitivity Analysis of i-DIC Approach for Residual Stress Measurement in Orthotropic Materials
• 44 Stress Measurement Repeatability in ESPI Hole-Drilling
• 45 Some Aspects of the Application of the Hole Drilling Method on Plastic Materials