Advances in Thermal System, Materials and Design Engineering

P. A. Rajiwade, N. P. Gulhane

• Publisher: CRC Press
• Year: 2026
• Topic: Technology & Engineering
• eBook ISBN:
  9781040820520
• Subtopic: Industrial Engineering
• Index: Technology & Engineering

The second International Conference on Advances in Thermal System, Materials, and Design Engineering (ATSMDE), which featured the most recent findings from research organizations and higher education, was held on December 27–28, 2024, in the Mechanical Engineering Department of Veermata Jijabai Technological Institute (VJTI), Mumbai; in the Association with Directorate of Technical Education, Maharashtra State University of Mumbai; Institute of Chemical Technology, Mumbai; and the Mechanical Engineering Department of the Indian Institute of Technology Bombay

Table of contents

• Cover Page
• Half Title page
• Title Page
• Copyright Page
• Contents
• List of Figures
• List of Tables
• Foreword
• Preface
• About the Editors
• 1. Heat Pump Dryer for Agricultural Produce
• 2. Experimental Study on A House Model with A Solar Chimney
• 3. Performance Analysis of Microchannel Heat Sink with Fan-Shaped Cavities
• 4. Mathematical and Simulation Analysis of Various LED Bulb Arrays
• 5. Numerical Analysis of Nusselt Number and Friction Factor in Rhombus Type Artificial Roughness in Solar Air Collector
• 6. The Influence of Thermal Conductivity and Embedded Tubes on The Hydrogen Storage Performance in The LaNi5 Reactor
• 7. Experimental Investigation of Different Shapes of Perforated Fins with Natural Convection
• 8. Development of Artificial Neural Network Model to Investigate Performance Parameter of Inclined Ribs with Gaps Roughened Solar Air Heater
• 9. Investigation of Flat Heat-Pipe-Based Tab Cooling Thermal Management for Battery Pack
• 10. Thermal Performance of Al2O3-Water Nanofluid in Copper Metal Foam: An Experimental Analysis
• 11. Evaluating Tilt Angles and Reflector Types for Enhanced Irradiance in Vertical Bifacial Photovoltaic Systems
• 12. CFD Simulation for Jet Interaction with Flow Obstruction and Erosion of The Stratified Layer
• 13. Thermal Performance of Heat Pipe—An Experimental Study
• 14. Comparative Performance Analysis of Air-Cooled Versus Evaporative Condensers with Different Cooling Pad Materials
• 15. Estimation of Shock Strength for Conical Supersonic Underexpanded Nozzle in Stable Atmospheric Condition
• 16. Vapour Compression System using CO2 as a Refrigerant
• 17. Numerical Investigations of Li-Ion Batteries Cooling System Used in Electric Vehicle
• 18. Effect of Intermittent Impingement on Heat Transfer Characteristics
• 19. Heat Transfer Analysis in Gun Barrels
• 20. Thermal Characteristics of a Phase Change Material (PCM) During Separate and Simultaneous Charging and Discharging in the Presence of Inclined Fins
• 21. An Experimental Investigation of Impinging Air Jet on Rectangular Grooved Surface
• 22. Experimental Investigation and Exergy Analysis of a Two-Stage Humidification-Dehumidification (HDH) Based Desalination System by Varying Water and Air Temperature
• 23. Experimental Investigation of Flame Stabilization in Standalone Liquid Fuel Film Combustor
• 24. Evaluation of Pressure Based and Density Based Solver to Investigate Supersonic Jet Flow through the Confined Wall
• 25. Experimental Investigation of the Effect of Heat Source Designs on Standalone Liquid Fuel Film Combustor
• 26. Approaches Used for Cooling Load Computation Based on ASHRAE and ISHRAE Standards
• 27. Three-Dimensional Fluid Flow and Heat Transfer Analysis of Reflector Tank for a Research Reactor
• 28. Ray Tracing-based Discrete Aiming Strategy for Heliostat Field to Obtain Uniform Solar Flux Distribution in 1MW Cavity Receiver
• 29. Experimental Evaluation of Methyl Ester Blend Emissions for Compression Engines
• 30. Assessing k-ε Family Turbulence Models for a Study of Sonic Jet Flow in a Quiescent Environment
• 31. Study on Axial Conduction in Microchannels
• 32. A Note on Non-modal, Transient Decay in Linearly Unstable Flows
• 33. Numerical Modeling and Optimization of Counterflow Wet Cooling Towers
• 34. Drag Reduction Using Flow Separation Control in Decelerating Duct of Marine Propeller
• 35. An Investigation of Construction Strength of M25 Concrete Added with Polystyrene for Plastic Waste Management
• 36. Experimental Investigation of MWCNT Nanocomposite and Effect of Infill Ratio Variation on Flexural Strength
• 37. Evaluation of Mechanical Properties in Al-SiC Metal Matrix Composites Fabricated via Stir Casting Process
• 38. Investigation of Zeta Enhances the Surface Charge with pH Stability of Phase Change Materials
• 39. Micro-Structuring on Polyimide using Excimer Laser Lithography
• 40. Impact of Coolant Temperature on Machining Performance During Turning of SS304
• 41. Experimental Study of Post-Consumer Recyclates (PCR) in Primary Non-Food Packaging
• 42. State of the Art on Reverse Engineering in Manufacturing Applications
• 43. Influence of Infill Density, Raster Angle, and Pattern on the Tensile Strength of PLA+ and ABS+ in FDM 3D Printing
• 44. Experimental Investigation of Torsional Fatigue Behaviour in Pure Epoxy Resin
• 45. Predictive Optimization Framework for Die-Punch Clearance in Copper Sheet Metal Blanking to Control Burr Formation
• 46. Visual Vibration Analysis for High Amplitude Movements using Pixel Matching
• 47. Spring-back Analysis in V Bending Process of Sheet Metal Through Finite Element Method
• 48. Cellular Materials for Multifaceted Applications
• 49. Mathematical Modelling and Design Calculator for Cup-Shaped Forging
• 50. Manufacturing and Characterization of Jute/Glass PLA Hybrid Composites
• 51. Finite Element Analysis of Straight Horizontal Flat Clamps Hinged at One End Milling Fixture for Friction Stirs Joining Process of Aluminium AA3103
• 52. Comparative Study of Topological Optimized Bio-Inspired Structure for Its Superior Mechanical Strength
• 53. Using Artificial Neural Network and Finite Element Method to Predict the Spring Back in Deep Drawing
• 54. Binder Jet 3D Printed Alumina Substrates: Sintering and Dielectric Property Study
• 55. Designing of bi-Phase Electrolyte Material for Low-Temperature Solid Oxide Fuel Cells
• 56. Performance Evaluation of Turning Bearing Steel: Insights into Cooling Techniques and Machining Parameters
• 57. Influence of Quenching Media and CuO Nanomaterial Concentration on the Temperature Gradient and Hardness Properties of EN-8 Material
• 58. Development and Evaluation of Easy to Apply Nano Fire-Retardant Composite Coating for Cotton/Polyester Fabric
• 59. Chemically Synthesized Monoclinic BiVO4 for Photoelectrocatalytic Water Splitting
• 60. Material Selection Aerospace Components by Micro-WEDG Process with m-Polar Fuzzy ELECTRE-I: New Approach
• 61. Sustainable Corrosion Inhibition: Exploring the Role of Bael Extract in Corrosion Mitigation
• 62. Assessing Electric Vehicle Ranks: A Comparative Study of Normalization Techniques in Multi-Criteria Decision Making
• 63. Pneumatically Operated Upper Body Exoskeleton
• 64. Modifications in Split Hopkinson Pressure Bar to Study the Response of TPB Specimen under High Strain Rate Loading: A Combined Experimental and Numerical Study
• 65. Emergency Rapid Deflation Device [ERDD] for Lighter Than Air Systems
• 66. Detection of L- and Inverted T-Shaped Crack in Cantilever Beam Using Artificial Neural Network
• 67. Development of Eco-Friendly Filtration Technique and Water Treatment Solution During Indian Rituals
• 68. Multi-Fault Detection in Bearings Using Voting Classifier: A Machine Learning Approach
• 69. Design and Development of Test Rig for Electric Propulsion System for an Unmanned Aerial Vehicle (UAV)
• 70. Exploring the Oil Analysis of Damaged Crankshafts in Gensets for Advanced Design and Development
• 71. Design Analysis of Helium Compressor for GM Cryocooler
• 72. Assessing the Influence of Particle Size and Filling Ratio on Response Reduction of a Particle Damper
• 73. An Extensive Exploration in Integration of Robotics to Amplify Efficiency within Logistics through Automated Storage and Retrieval Systems
• 74. Experimental Performance of Automated Zinc Flake Coating in Wind Energy Applications
• 75. Optimized Design of a Motorcycle Disc Brake Plate through Material Selection and Weight Reduction
• 76. Design and Applications of a Multi-Functional Foldable Staircase Mechanism
• 77. Parametric Analysis and Parametric Study of Kinematics, Load Distribution, and Torque Dynamics in Quadruped Robot Design