Pipeline Planning and Construction Field Manual

E. Shashi Menon

• Verlag: Gulf Professional Publishing
• Jahr: 1978
• ISBN:
  9780123838544
• Thema: Tecnologia e ingegneria
• Thema: Combustibili fossili

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices.

• Back-of-the envelope calculations
• Checklists for maintenance operations
• Checklists for environmental compliance
• Simulations, modeling tools and equipment design
• Guide for pump and pumping station placement

Chapter 1. Design Basis

E. Shashi Menon, Ph.D., P.E.

Chapter Outline

Introduction 1

1.1 Units of Measurement 2

1.1.1 Base Units 2

1.1.2 Supplementary Units 3

1.1.3 Derived Units 3

1.2 Physical Properties of Liquids and Gases 4

1.2.1 Liquid Properties 5

1.2.2 Gas Properties 19

Summary 40

Bibliography 41

In this chapter, we outline the design basis that forms the foundation for the design of pipelines, pump stations, compressor stations, valves, and other facilities that comprise the pipeline system. The Design Basis Manual or Memorandum (DBM) is a document that is initially developed following discussions between the pipeline owner company and the engineering firm that is responsible for the designing and (in many cases) construction management of the pipeline. This document is continuously revised and updated during the project life. All participants in the project must have access to the DBM so that a consistent documented basis for all aspects of the pipeline will be followed throughout the design and construction of the project.

Introduction

In this chapter, we outline the design basis that forms the foundation for the design of pipelines, pump stations, compressor stations, valves, and other facilities that comprise the pipeline system. The Design Basis Manual or Memorandum (DBM) is a document that is initially developed following discussions between the pipeline owner company and the engineering firm that is responsible for the designing and (in many cases) construction management of the pipeline. This document is continuously revised and updated during the project life. All participants in the project must have access to the DBM so that a consistent documented basis for all aspects of the pipeline will be followed throughout the design and construction of the project.

First, we review the units of measurement used in the pipeline industry. The various units of measurement and calculations used in the United States of America, Canada, and other countries will be discussed and the conversion between the commonly used units explained. Next, we address the physical properties of fluids (liquids and gases) that are transported in the pipeline. Chapter 7, Chapter 8 and Chapter 9 will further describe the details of the pipeline design basis by analyzing the major components such as pipes, valves, pumps, compressors, and ancillary equipment. An outline of the various components that constitute a DBM is also provided in Appendix 1.

1.1. Units of Measurement

The units of measurement employed in the pipeline transportation industry consist mainly of the English or USCS system of units (US Customary System) and the metric or SI (Système International) system of units. USCS units are used exclusively in the United States of America, whereas SI units are used in the countries that use metric units, such as Europe, Asia, Australia, and South America. In Canada and some South American countries, a combination of USCS and SI units are used.

In USCS units, measurements are derived from the old foot-pound-second (FPS) and foot-slug-secon...